Blog

Inside Port Newark and the Elizabeth Marine Terminal

The first container ship sailed from Port Newark in 1956. In 2025 the port moved 5.96 million loaded containers. How it works and why it matters.

Drive south on the New Jersey Turnpike past Newark Liberty Airport and the view changes. Cranes taller than office towers line the waterfront. Stacks of steel boxes in red, blue and gray rise in rows, and trucks queue at gates. This is the Port Newark-Elizabeth Marine Terminal, the main container facility of the Port of New York and New Jersey, and it is arguably the most important piece of commercial infrastructure in the state.

Most of what arrives here never enters a New Jersey home. It is loaded onto trucks and trains and carried across the Northeast and into the Midwest. But the port is also a New Jersey story, because the container shipping industry that the whole world uses began on these docks.

The box that started here

On April 26, 1956, a converted tanker called the Ideal X left Port Newark with 58 metal containers on its deck, bound for Houston. The ship belonged to a trucking executive named Malcom McLean, who had a simple idea: instead of unloading a truck's cargo piece by piece and reloading it on a ship, put the entire truck body, or a box the size of one, onto the vessel. It was a modest start. But what McLean's company did, and what became Sea-Land Service, ultimately changed global trade by cutting the cost and time of moving freight between ships, trains and trucks.

The Port Authority of New York and New Jersey, created in 1921 as a bi-state agency (see The Port Authority of 1921: how two states agreed to share a harbor), saw what was coming. It opened a terminal in Elizabeth on August 15, 1962, laid out for containers from the start, with large areas of open land for stacking boxes and berths designed for the new ships. Together with Port Newark, just to the north, the Elizabeth terminal became the Port Newark-Elizabeth Marine Terminal. The facilities were built in the 1950s and after, and by one account of the port's history, in 1985 this was the busiest port in the world by the measure of cargo handled.

For a place that was once salt marsh and tidal flats, the transformation was dramatic. The Newark Bay waterfront filled in, rail lines were laid, and the Turnpike's Newark Bay Extension, opened in 1956, gave the port a direct highway link. See The Newark Bay Extension and I-78.

The numbers

Port volumes are measured in TEUs, twenty-foot equivalent units, the size of the smallest standard container. A 40-foot container counts as two TEUs. In 2025, the Port of New York and New Jersey handled:

  • 5.96 million loaded TEUs, which the port's own figures place second in the nation for loaded containers.
  • About 8.9 million total TEUs, which includes empty containers that are moved back to where they are needed.
  • 4.51 million TEUs of imports and 1.44 million of exports. Add the two and you get the loaded figure, about 5.95 million, within rounding.
  • Rail volume up 12.4%. More of the cargo left the port by train than a year before.

Imports far outnumber exports, as they do at nearly every American container port. That imbalance is why so many empty containers are sent back to Asia and Europe, and why the share of empties in the total is large. Behind each number is a ship, a crane and a truck driver. A big containership can carry thousands of boxes, and the port handles ships from lines around the world.

What the port is made of

The port is a set of terminals, not a single dock. The Port Authority owns the land and leases the terminals to private operators, who run the cranes and the yards. The main pieces are:

  • Berths and cranes. Ship-to-shore cranes lift containers off the vessels, and rail-mounted or rubber-tired gantry cranes and yard machines move them around the yard.
  • Container yards. Boxes are stacked and tracked, and the terminals' systems know where each one is.
  • On-dock rail. The port has rail facilities beside its docks, where a train can be loaded directly from the yard. The Port Authority's ExpressRail system carries containers to and from inland destinations. Moving a container by train takes many trucks off the highways.
  • Truck gates. Every box that leaves by road passes a gate, and the gates are where the daily flow of trucks, and the occasional backup, can be seen.
  • Warehouses and distribution centers, in the surrounding Essex, Union and Hudson counties, where goods are sorted before delivery to stores and homes. See the port, the warehouses and the jobs.

A container's trip, step by step

A worked example makes the system concrete. Say a shipment of sneakers is packed into a 40-foot container at a factory in Asia, sealed and trucked to a port there. It is loaded onto a containership, which crosses the Pacific, passes through the Panama Canal and arrives off the coast of New Jersey some weeks later. Here is what happens next.

  1. Arrival. The ship is guided into the harbor by a pilot, passes under the Verrazzano-Narrows Bridge, enters the Kill Van Kull under the Bayonne Bridge and ties up at a berth in Newark Bay.
  2. Unloading. A ship-to-shore crane lifts the container onto the dock. The terminal's computer system records its position, and a yard machine carries it to a stack.
  3. Customs. Federal officers decide whether the container is cleared, scanned or inspected. Most are cleared by paperwork and risk screening.
  4. Pickup. A trucker, or a train crew, collects the container. If it is headed to a distribution center in New Jersey, it goes by truck. If it is headed to Chicago, it may go by rail from the on-dock rail yard.
  5. Return of the empty. After the goods are unloaded at the warehouse, the empty container goes back to the port, to be refilled with exports or sent overseas.

The whole sequence is a relay, and delays at any link, from a crowded gate to a shortage of trucks, ripple through the rest. That is why the port authority and its tenants track the flow so closely.

Why the Bayonne Bridge was raised

A recurring problem in the port's recent history was height. Larger container ships, built after the Panama Canal's expansion opened in 2016, stand taller above the water, and the Bayonne Bridge, which crosses the Kill Van Kull, the channel the ships use to reach the Newark Bay terminals, was too low. The Port Authority's solution was to raise the roadway of the bridge inside its existing arch, increasing the clearance from about 151 feet to 215 feet, while keeping traffic moving. The work reached the needed clearance in 2017 and the project was complete by 2019. The channels were also deepened to take the larger ships. See Bayonne and the Bayonne Bridge for the bridge's story.

The lesson of the episode is that the port is a system. A bridge, a channel, a yard and a rail line all have to be adjusted together. A ship that cannot clear a bridge cannot call at a terminal, however many cranes it has.

Who works there

The port supports a wide range of jobs: crane operators, longshore workers, truckers, rail crews, customs and border inspectors, pilots who guide ships in and out, tug crews, warehouse workers and logistics planners. Many are members of the International Longshoremen's Association, whose workers have long staffed the docks. For a broader look at logistics employment, including the warehouses in Essex, Union and Middlesex counties, see the port, the warehouses and the jobs and where the jobs are: pharma, finance, logistics and health. The Port Authority itself publishes port statistics, and its pages are the best place to find the most recent figures.

Customs inspection is part of the work. Federal officers screen cargo as it arrives, and a share of containers is scanned or opened. This is also part of why a ship's schedule is not entirely in the port's control.

The neighborhood next door

Port Newark and the Elizabeth terminal are surrounded by communities that live with the port every day. The Ironbound section of Newark lies a short distance away, and Elizabeth, the Union County seat with 137,298 residents in the 2020 Census, borders the terminal. The port's trucks use the Turnpike, Route 1 and 9 and local roads, and neighbors have long raised concerns about truck traffic and diesel exhaust. The Port Authority and the state have run programs aimed at cleaner trucks and equipment, and the shift of more cargo to rail is one way to ease road congestion. Readers can look at the air quality monitoring discussed in Air quality in New Jersey and the DEP's monitoring network. For the cities, see Newark and Elizabeth.

The airport is next door as well. Newark Liberty International, also run by the Port Authority, handled about 47 million passengers in 2025 (see Newark Liberty at 47 million passengers). Runways, container yards and the Turnpike share the same corridor, which is part of why the area is so busy.

How to see it

The port is mostly closed to the public, because it is a working industrial and security-controlled area. But it can be seen from outside the gates. The Turnpike offers a long view of the cranes and stacks. The Elizabeth waterfront and parts of the Newark Bay shore offer views of the ships. For a closer look at the history, the Port Authority's own history pages and exhibits tell the story of the Ideal X and the early container terminals.

Visitors should not expect a tourist attraction. The point of the place is the work. A glance at a ship being unloaded, at the line of trucks at the gate and at a train leaving loaded with containers gives a sense of the scale. The same flow of goods sustains the stores, factories and warehouses of the Northeast, and its starting point, in 1956, was a ship leaving Port Newark with 58 boxes on deck.

Why it matters to the state

Port Newark and the Elizabeth Marine Terminal make New Jersey a front door of the American economy. The state's own prosperity is tied to it in obvious ways, such as jobs and property taxes, and in less obvious ones, such as the demand for warehouses along the Turnpike corridor and the pressure on the state's roads. The container, a steel box that cost almost nothing to invent, has shaped the landscape of the northern part of the state more than almost any building.

Related state government

Related guides

Related towns and regions

Latest on this topic