Blog
A walk around the Great Falls of Paterson
The 77-foot Passaic Falls powered the planned mill city that Alexander Hamilton's society founded in 1791. A walk along the falls, raceways and mill buildings.
You hear the Great Falls before you see them. Walk toward the Passaic River in downtown Paterson on a spring morning, when the water is high, and a low roar rises from a gorge that seems to appear out of nowhere in the middle of a city. The river drops about 77 feet over a basalt ledge, through a cleft some 280 feet wide, and a city grew up around them, and for a time it was the most ambitious industrial experiment in the young United States.
This walk starts at the falls and follows the water that was taken from them, through the raceways and mill buildings that made Paterson. It is a mile or two on foot, with plenty to stop and look at.
The falls
The Passaic Falls, as the cascade is also called, is a natural feature that early settlers noticed and the first generation of Americans admired. Alexander Hamilton, as the first Secretary of the Treasury, visited with George Washington before the city existed, and the power of the water was clear. A river that dropped so far in so short a distance could turn many wheels.
The falls are 77 feet high, and the river rushes through a narrow cleft in the rock before spreading again below. The city of Paterson, which counted 159,732 residents in the 2020 Census and is the third largest in the state, has built overlooks and a path so that visitors can look into the gorge. A bridge crosses above the chasm, and from it and from the surrounding park, the full height of the drop is visible. The water level varies with the season and the rain; the falls are most impressive after a wet week and quieter in dry summers.
The Society for Establishing Useful Manufactures
The reason there is a city at the falls is a plan that Hamilton helped to shape. In 1791, he and a group of investors organized the Society for Establishing Useful Manufactures, usually shortened to the S.U.M. The idea was to create a manufacturing city, powered by the falls, that would show that the United States could make its own goods instead of depending on imports from Britain. New Jersey granted a charter in November 1791, and the society was organized that winter. The society itself was organized in the weeks that followed. The planned town was named Paterson, for William Paterson, the New Jersey governor who had signed the charter.
The S.U.M. hired the French-born engineer Pierre L'Enfant, who had laid out the plan for the new capital at Washington, to design a system of canals to bring the river's power to the mills. The system, known as the raceways, ran through a network of channels about two and a half miles long, bringing water from above the falls to the factories below. That was the machinery of the place: not the mills alone, but the system of water that fed them.
The early years were rocky. The society struggled financially, and its first mills did not make a large profit. But it set a pattern. Over the nineteenth century, a dense collection of mills, including cotton, locomotive and machine works and, eventually, the silk factories that gave the city the name Silk City, drew on the same raceways. The S.U.M. continued to operate for more than a century and a half, and sold its charter and property to the City of Paterson in 1945. See paterson and the 1791 manufacturing society for a closer look at the society.
The raceways and mills
The raceways are the walk's main attraction after the falls. They are narrow channels, stone-lined and open to the sky, that run from the river through the mill district. A visitor can follow them on foot, passing the old mill buildings and seeing the water in its channels. The raceway system was recognized as an engineering landmark by civil and mechanical engineering societies, which noted its place in the history of American industry.
The buildings beside the raceways are brick mills, some restored and some still waiting for a use. Several were adapted for new purposes after the factories closed. One of the better-known industrial names of the area is Samuel Colt, who started a firearms factory in Paterson in the 1830s. The mills made many things: silk thread and cloth, locomotives, machinery and more, and the result was a diverse industrial base that gave Paterson its character.
Walk along the water and you can read the layout: mill after mill with its own drop of water, using the same fall of the river in sequence. The pattern is easier to understand on the ground than on a map.
What to look for along the raceways
The raceway system was laid out in levels, an upper, a middle and a lower channel, so that the same water could serve mills at different heights on the slope below the falls. That design is the key to reading the district. Follow a channel and you will see the stone walls that hold it, the gates that controlled the flow and the places where water was once led into a mill and returned to the river. The idea was that a single drop of the Passaic could turn a series of wheels as it stepped down the hill, rather than being used once and wasted.
Look too at the mills' placement. The largest buildings sit where the channels were widest and the drop was greatest, and the smaller ones are tucked into the gaps. The street grid of the nearby neighborhood follows the same logic, with workers' housing a short walk from the factory gates. A walker who pays attention can reconstruct a nineteenth-century city of a few thousand people, living and working within a few blocks of the water.
A city of workers
Paterson's industry was built by immigrants. Mill owners recruited workers from England and Ireland first, then from Germany, Italy, the Netherlands and many other countries, and the city's neighborhoods grew around the mills. That workforce also made the city a place of labor struggle. In 1913, silk workers walked off the job in a strike that drew national attention to Paterson's conditions. It ended without a clear victory for the workers, but it is a part of the American labor story, and it is remembered in the city's history.
The same mix of immigrants has continued to shape the city. Today's Paterson, which is roughly 62% Hispanic or Latino, also has large Turkish, Arab and South Asian communities, and the story is told in South Paterson and the immigrant city. The raceways and the mills are the setting where it began.
The national park
The falls and the mill district are part of Great Falls National Historical Park, a unit of the National Park Service. The park's purpose is to interpret the beginning of American industry, and its exhibits and rangers explain the raceways, the S.U.M. and the mills. It is also where a visitor can learn about the falls' own use, including a historic hydroelectric plant at the site. Admission to a national park unit like this one is generally free, but a visitor should check the Park Service's page for the current hours, tours and programs.
See Great Falls National Historical Park for the park itself, and Paterson for the city.
Reading the gorge
The geology deserves a minute. The Passaic River flows across relatively flat country and then meets a ridge of hard basalt, the Watchung ridge's northern end, where it has cut a narrow gorge. That is why the river drops so abruptly, and why a spot in the middle of a city has a waterfall. The same rock is part of the Newark Basin region that the state's geography describes, with the Palisades and Watchung Mountains. The falls are, in effect, the point where the river finds the edge of the hard ground, and the factories that came later were built on that accident of stone.
Next door: Hinchliffe Stadium
A short distance from the falls, on a hill above the river, stands Hinchliffe Stadium, the 1932 ballpark that hosted Negro Leagues baseball and reopened in 2023. A walker who has seen the falls can easily add it to the trip, and the two places together tell much of the city's story. See Hinchliffe Stadium and the Cosmos' return.
Practical notes
- Getting there. Paterson is reachable by car on Route 80, Route 20 and local roads, and by NJ Transit buses and rail connections that lead into the city. Parking is available near the falls, and a visitor should check posted rules.
- Weather. The falls are loudest in spring, and the paths can be wet or icy at other times of year. Wear shoes with grip.
- Time. An hour will cover the falls and the overlook. Two or three hours allows for the raceways, the park's exhibits and a walk through the mill district.
- Safety. The falls and the gorge are steep, and fences and railings are there for a reason. Stay on the paths.
- Respect the neighborhood. The mills are part of a living city. Visitors who stop at a local restaurant or shop are supporting the people who live beside the history.
What the walk means
The Great Falls make an unusual kind of landmark. They are not a monument to a battle or a leader, but to an idea, that a nation could be built on manufacturing, and to the practical work of making the idea real: canals dug through rock, mills raised beside them and workers recruited to run them. Paterson's later history showed that the idea had costs as well as benefits. The factories fell on hard times, and the strikes of 1913 reminded the country that the people who ran the machines had a stake in the results. A visit to the falls takes in the whole sweep, from a plan made at the founding of the republic to a city of 159,732 people today. And over it all, in spring, comes the sound of the water.